Let us share the Advancement & Advantage of the Modern Age Technology
feedback       site map       client list       contact us
M-39 CNC Control for Milling machines, Routers, Plasma, Water Jet, Engraving Knee Mills, Bed Mills.
Complete CNC systems for New and Retrofit Installations
Turn-key CNC control, reduces machine downtime and makes profitable parts quickly.
Check List for fast simple CNC control integration.
  • Complete running CNC System ready to Install.
  • One to two day install on most machines.
  • Prewired Servo motors and encoders.
  • Servo Motor Drive programmed and wired.
  • Control Power supplies provided and wired.
  • PLC pre-programmmed and wired, w/extra outputs.
  • CNC PC w/software pre-installed w/fiber optic communication.
  • Built specifically for your machine: Motor sizes, cable lengths, voltages, accessories cables, mounting hardware and more.
  • Sealed electrical enclosure, prewired tested and ready to use.
  • Display and operators pendant mounting hardware included, multiple configurations for custom applications.
  • Lube,Mist, Flood,Vacuum, Spindle, and custom use contactors/relays  provided and wired ready to use*
  • Remote operator control pendant, plug and play control of spindle, jog axes, tool check, e stop, feed hold, coolant
  • Pre-programmmed key functions for common machine tool operations along with custom user defined key functions.
  • User friendly Tool and Part setup menus.
  • G code backplot graphics with time estimation.
  • Money making options you can add at any time such as:
    Digitizing, Probing, Auto tool measurement, Coordinate System Rotation, Work Coordinate Systems and more.
  • Factory Tested and Run-in, ready for installation as shipped.
  • One year warranty, on-site installation and training available.
(Click on image to enlarge)
Start making parts now! Ready for installation on both new and retrofit applications.
Water Jet
CNC Routers
Milling Machines
Complete CNC control is assembled and factory tested ready to install.
We build the CNC so you don't have to. Ready to install on the machine, the M39 is custom built for your application, all servo motors, power supplies, PLC programming, CNC PC and Software are shipped assembled and ready to run. Get down to business fast and start making profitable parts right away, no other CNC control saves you this much time on installation. Since the M39 is a running CNC control as shipped, the installation is just a matter of bolting up the control, installing the servo motors, and connecting the power.

The M39 can drive either AC or DC servo motors up to 5 axes. The complete wired electrical enclosure can be mounted to the machine or with the CENTROID stand shown. Monitor and keyboard along with the pendant dock allow for easy machine adaptation and customization. Hardware provided makes installation quick and simple. The base M39 CNC system is powered by standard 110 VAC or can be ordered in a high power version for 220 volt single or three phase or 440 volt phase input applications.


Useful Tools for quicker job turn around.
  • Stop and restart the job at any point.
  • Stop, make any adjustments, and restart right where you left off.
  • Toolpath Graphics show cutter path before & during the job.
  • On-the-fly override control of feeds and speeds.
  • Useful Help Screens guide you through Setup and Programming.
  • Remote control for fast job setups on large format machines.
  • Run large part programs with no limitations.
  • High Speed processing provides smooth machining, no gouging.
  • Fast, smooth continuous tool motion, no hesitation or dwell.
Dedicated control panel for all common Milling functions
  • Remote control pendant can be used hand-held or mounted.
  • Clearly labeled controls for each axis and direction.
  • Dedicated buttons for spindle and coolant controls.
  • Spindle speed override and Feedrate override.
  • Tool Check, Feed Hold, Cycle Start, Rapid override,
     Incremental and Continuous Jog, Single Block.
  • Customize with Tool index +/-, Clamp/Unclamp, Vac on/off, & more.
  • Extra auxiliary buttons are programmable for special applications.
  • Fully sealed, coolant-proof, long lasting in shop environment.
  • Tactile feedback, raised buttons with distinct action.
  • Indicator lights show the selection made.
Conversational Programming is fast and easy
  • Program parts right at the control or offline with your desktop PC
  • Centroid's Intercon generates the G codes for you.
  • Help screens for all the common milling cycles,
     just fill in the dimensions. Even lines and arcs are canned cycles.
  • A graph of the part shows your work as you go. Graph your work at any point, shows both cutter comp and programmed path.
  • Automatic pocket cleanout, Intercon auto creates the
    roughing and finish passes automatically.
  • Fill in the blank programming.

    Click here for more part programming info.
CAD to CNC, DXF file import with Intercon Conversational.
Convert DXF files into G code with CENTROID's Intercon conversational programming software. NO CAD/CAM system necessary. Fast and simple, this new feature allows you to create parts directly from a CAD file on the control or on your desktop PC. You can even combine any or all of your CAD file with any conversational events. This is the most flexible way to take advantage of both CAD/CAM like programming with the simplicity of conversational. With a fast learning curve anyone can be producing money making parts from a DXF file in short order. This new feature saves you both time and money, less expensive than a CAD/CAM system, much easier to learn with faster results.

Click here for more CAD to CNC info.


5 Axis CNC control. True simultaneous 5 axis machining.
NEW! True 5 axis machining is now available. Smooth consistent 5 axis motion. Great for either gimble table setups or knuckle head machines. X,Y,Z,A and B motion all at the same time or in any combination. For Milling machines and CNC routers.


Auto tool changer
The CENTROID CNC control can operate a wide variety of types of tool changers. Umbrella type to Swing arm -- the Centroid provides fast repeatable tool changes. Automatic batch measurement is also available when used with our TT-1 Auto Tool Setter. Just highlight the tools you would like to measure and the batch feature will automatically retrieve, measure and replace each tool automatically.


Rigid tapping, Deep hole tapping and Threadmilling
With a CENTROID M39 you can make all kinds of threads.You can use Tapping, Rigid Tapping and Threadmilling depending on your part for the best result! CENTROID's advanced rigid tapping is simple to program and will both tap a hole in the regular way AND can also use the deep hole cycle to make a large diameter thread. Deep hole tapping taps a hole much in the same way as you would by hand. It allows you to tap a much larger hole than the HP of your machine would normally allow!


Digitizing. Turn your milling machine into a copy machine.
Copy and Cut 2D and 3D shapes. Centroid's affordable, effective Digitizing is the simplest CNC Digitizing on the market. Just record and play back. Do you have a 2D contour such as a CAM or a 3D part like a mold or plug? But no print? Let our Digitizing feature copy the part for you. Digitizing turns your milling machine into a copy machine. Centroid has overcome the cumbersome problems associated with Digitizing on other controls. With a Centroid, it's actually one of the simplest features on the control to use. With our Digitizing feature you will be able to copy and reproduce an existing shape with little or no programming! No CAD/CAM necessary, however you can export the Digitizing information to a CAD/CAM system for further modification. It's very popular for repairing cylinder head combustion chamber damage, copying cams, creating molds and plugs from existing objects and many other uses. more...


Auto tool set
Setup your tools in a quarter of the time it would normally take! If you often machine short-run parts and are always setting up and tearing down for a new job, the TT-1 Auto tool set will save you tons of time while more accurately setting your tool height offsets. With the TT-1 you can create more parts per hour since the tool set up is so much faster. You'll even save time when you have to replace a dull tool with a new one in the middle of a job. The TT-1 is completely automatic. Press "measure" and the tool will automatically touch off the TT-1 and set the tool height offset in the tool library. See the TT-1 in action on our Video CD. The TT-1 plugs into the control...


Fully sealed, coolant-proof Keyboard
With any CENTRIOID CNC control you can use a regular PC keyboard or our fully sealed unit. We found that about half our customers prefer a regular open style PC keyboard and the other half prefer a sealed unit. The CENTROID sealed PC keyboard is liquid-proof and provides reliable and durable keyboard operation in a shop environment.Our keyboard is: fully sealed, coolant proof, long lasting in shop environment, has tactile feedback, and has raised buttons with distinct action. Click here for more..


Retrofit CNC Kits for Routers, Plasma, Knee Mills, Bed Mills and many more specialty machines.
Good iron? Obsolete control? Time for a CENTROID Retrofit! Turn your Milling machine into a money-maker with a modern Centroid CNC control. Our complete turnkey retrofit systems are prepared for your specific machine, making retrofit installation times much faster. Machining performance is better than new, programming is now faster and simpler, and maintenance costs are virtually eliminated. How much money per year are you spending to keep your old control alive? Don't throw away your money when you could have a new reliable Centroid CNC installed (with training) for less than the cost to keep on an old CNC alive. The Centroid retrofit upgrade is also much less than the cost of buying new. Click here for more retrofit information.


CENTROID CNC Service and Support
Centroid CNC controls have a proven reliable track record and offer cool, quiet operation. Our controls are easy to maintain, with autotune, dragplot and self diagnostics. Centroid CNC users are supported by a nation wide network of local Factory Trained Technical Representatives who provide fast affordable service, training and upgrades. Centroid users can stay up with current technology with easy Centroid CNC software updates. In just minutes, new CNC features can be added to the control.


Powerful control with user-friendly operation
  • Cut parts the first day with CENTROID's straight-forward operation.
  • Machine parts not possible with other controls.
  • Get more work through a machine with faster setups.
  • Produce parts with a better surface finish.
  • Spend less time programming and more time making chips.
  • Bring in more work and bid on higher paying jobs.
  • Economical control delivers the power and features.
  • Easily customizable, use any size display.
  • Remote control for faster setups.
  • USB 2.0 and Ethernet Lan connection for easy file transfer.
  • Use any Standard PC keyboard or fully sealed unit.
  • Use any size LCD display


COPYRIGHT © 1999 - 2006 MARS Enterprises., ALL RIGHTS RESERVED
Website designing and development by SunLand Technology Web Hosting by DomainsVilla.com